WeldingCity 1-Lb ER316L Stainless Steel 316 TIG Welding Rod 1/16"x36" | Pack of 1-Lb

Product Information

Pipe Mill Welding, cutting and fabrication of large-scale pipe for cross-country and subsea material transfer. When TIG welding 316 to Inconel 625 use pure argon for welding shielding & purging with DCEN welding polarity. Welding 316 to 321 Stainless Steel

The main 316 welding rod is E316-15, E316-16, E316-17 as per AWS A5.4 specification. 316 TIG welding rods are classified in AWS A5.9. Following 316 welding rods are used for welding different grades of 316 stainless steel:Also, manufacturers often have charts you can consult to find their best product for a given weld. Steel But by using the guidelines in this article and, if needed, some information from the filler rod manufacturers, you can zero in on a good choice.

General Fabrication Fabrication of metal components and assemblies involving bending, forming, cutting and welding. Unfortunately, there is no definitive answer for the filler rod you “must” use for a weld. However, the weld you need to make defines certain parameters.Since the TIG filler rod composition needed is often the same as that used for MIG filler material, some of the MIG wires are also sold for TIG welding. These are identified as “TIG cut lengths.” Choosing a Filler Rod

But keep in mind you may need to tweak these settings depending on your welder and welding technique.Heavy Fabrication High deposition manual and automated solutions for heavy fabrication equipment and component manufacturers. Welding 316 with 309 rod will result in higher weld metal ferrite and thus result in reduced corrosion resistance, lower ductility and lower toughness. This wire provides excellent corrosion resistance in many environments and can be used in both indoor and outdoor applications. Additionally, this wire offers good mechanical properties and is easy to weld with. 316 Stainless Steel Welding Gas