SHREWD ARCHERY Vantage Series Hunting Stabilizer

Product Information

If you search for the best prize ridge hitman stabilizer review, you will want to keep reading. This article will provide an in-depth evaluation of the trophy ridge hitman stabilizer bow stabilizer. People always look for a bow stabilizer and get confused about the available options. I have collected valuable information about this product to make a wise decision.

Trophy Ridge developed this stabilizer to make it easy to shoot accurately. The Hitman Stabilizer has two 12-inch carbon rods, which increase the stability of your bow and significantly reduce vibration.HiLo-T DAMPER FEATURES 5/16"-24 THREADS AND MOUNTS ON A 2.5" LONG THREADED ROD ON THE END OF THE STABILIZER. SteneAviation fiberglass replacement parts are five times stronger than the original plastic parts offered by Cessna. They are exact replacements of the originals and come primed and ready for paint. The product line includes Cessna wing tips, strut cuffs, fin caps, rudder caps/bottoms, stabilizer tips, wheel pants and much more.

HiLo-S DAMPER SLIDES OVER THE CARBON AND ALLOWS THE USER TO POSITION IT WHERE IT MOST EFFECTIVELY REDUCES THE VIBRATIONS PARTICULAR TO THEIR BOW. Although it is on the price range’s high end, it is worth every penny. If you have the cash and are in the market for a new stabilizer, the Trophy Ridge Hitman should not be overlooked. It has proven itself to me as a model worthy of taking its place among other highly effective stabilizers on the market. Trophy Ridge Hitman Stabilizer is an excellent stabilizer for your bow. It has many features that are great to have on a stabilizer. This is an excellent stabilizer for the price.

The Hitman also features three rubber dampening rods that fit into each end of the stabilizer. These rods help further reduce any vibrations produced when you shoot your bow. Fourthly, there is a ball bearing inside of this stabilizer that makes it easier to spin your bow around when turning in tight spaces like underbrush and trees. The Trophy Ridge Hitman Stabilizer features an innovative design that combines vibration dampening with a sleek look. This stabilizer features three internal chambers filled with sound dampening material, creating a smooth and quiet shooting experience.

Secondly, it has a rubber damper. This will help you dampen vibrations when you shoot your bow. It will also help you with balance because it adds more weight to the front of the bow to make up for the importance of the arrows. VANTAGE SERIES HUNTING STABILIZERS UTILIZE A PROPRIETARY STS CARBON AND HiLo DAMPERS TO CREATE A REVOLUTIONARY STABILIZER SYSTEM DESIGNED TO MAXIMIZE PERFORMANCE. STS CARBON IS CONSTRUCTED WITH HIGH MODULUS CARBON AND FEATURES AN INTERNAL TAPER UNIQUE TO EACH LENGTH STABILIZER THAT RESULTS IN AN INCREDIBLY RIGID AND LIGHTWEIGHT SYSTEM. THE HiLo DAMPERS WORK IN CONJUNCTION WITH THE STS CARBON TO ISOLATE AND REDUCE HIGH AND LOW FREQUENCY VIBRATIONS FOR UNRIVALED DAMPENING AND NOISE REDUCTION. THE LOW-PROFILE DESIGN OF THE VANTAGE REDUCES THE OVERALL SURFACE AREA AND PREVENTS SNAGS ON UNDERBRUSH. INCLUDED REMOVABLE WEIGHTS ENABLE ULTIMATE ADJUSTABILITY FOR OPTIMAL BOW BALANCE AND STABILITY AT CRITICAL MOMENTS. THE VANTAGE SERIES IS SHAPED BY DECADES OF EXPERIENCE AND IS BUILT TO TAKE A BEATING. To adjust the weight of the Trophy Ridge Hitman Stabilizer, loosen its outer sleeve, slide-in or out as many washers as needed, then tighten it again. After doing this, you should dry-fire your bow several times to ensure that it balances appropriately.The Trophy Ridge Hitman is a well-designed and high-quality mechanical stabilizer for crossbows with a similar overall length to a rifle. The clean, sleek design blends nicely with the rest of the crossbow and compliments the look. To install the Trophy Ridge Hitman Stabilizer, loosen the two Allen screws at the top of your bow’s riser. Place the stabilizer through both holes and tighten them to secure it in place. The stabilizer can be adjusted to either parallel or perpendicular to your bow’s riser. Hilo-t damper features 5/16"-24 threads and mounts on a 2.5" long threaded rod on the end of the stabilizer.